Removing A No-Screws Bathroom Ceiling Light Cover


  • Although there are many different types of light fixtures, the basic procedure tends to remain the same when removing each type. Remove the light shade or bowl first, then the bulbs, and then the fixture plate to expose the wires.

    Thanks! Helpful Not Helpful


How Do I Get The Cover Off My Light Fixture?

You’ll find different methods of removal for different light fittings.

1. Notch or Groove Mechanism:

Using a slot or groove to remove a ceiling light cover without screws is one way. Then, gently pry off the light cover’s edge with a pry bar.

Be careful not to harm any wiring or cords beneath the light cover. Remove the cover to detach the light fixture from the ceiling.

2. Spring-Loaded:

The most frequent ceiling type. The cover is linked to the base with a small metal spring.

Push up on the cover’s bottom to remove but be careful as there may be wiring or connections behind the light cover.

3. Clip Mechanism:

Some ceiling lights come with small clips holding the cover in position. Push the cover by pressing one side of the clip until the other side opens.

Again, remove your ceiling light cover carefully to avoid harming yourself or damaging wiring or cables.

4. Threaded Retainer:

Unscrew glass shades or diffusers from threaded bases. Next, loosen the retainer with a screwdriver.

After loosening the threaded retainer, you can remove the light cover by hand. To loosen the retainer, you may require a utility knife instead of a flat-head screwdriver.

Insert the utility knife’s blade between the cover and ceiling and simply push and twist to loosen the retainer.

5. Slotted Connectors:

If your ceiling light cover has slotted connectors, you may need a specific tool. One alternative is to use a putty knife to pry the slotted connector until it pops free carefully.

Twist the connector using needle-nose pliers to loosen it. Remove the slotted connector to remove the bathroom ceiling light cover.

6. Flush Mount:

Behind the light cover, check for a small switch or lever on your ceiling flush mount fixture.

Press down on the switch/lever and slowly pull up on the light cover until it pops off. When removing the cover, be careful not to harm wiring or cords.

With patience and basic handyman abilities, you can remove your ceiling light cover without screws. (Learn How To Hang Lights On Stucco)


Wrap Up

I hope this guide helped you with the bathroom’s light fixture types and the process to remove each of them. I can completely understand, how confusing it is to figure out the disassembling process of a screwless light fixture. But It’s not rocket science.

Once knowing which kind of light fixture you have, It becomes child’s play.

If this article helped you, let us know in the comment. Feel free to drop your queries regarding How to Remove Bathroom Light Fixture Without Screws, I will be happy to help.

Affiliate Disclosure

FixNCleanWizard is a participant of the Amazon Associate Program, designed to generate revenue by advertising and linking to products.

Please note that the links don’t include any offers. It will help us earn a small commission that pays for the aftercare of the website.

4) COMPLEX: Turn and pull down (SLOTTED CONNECTORS)

Some have slotted connectors so that you turn it about 1/8 to 1/4 turn and then pull down, similar to the way a smoke detector is removed from its base.

Why Won’t Ceiling Light Cover Come Off

There can be several reasons why a ceiling light cover will not come off, even if there do not appear to be any screws holding it in place. In some cases, the cover may be glued in place. In other cases, the light fixture itself may be attached to the ceiling with bolts or other fasteners that are not visible from below. If the cover is not coming off, no matter how much effort you put into it, it is best to call a professional electrician to remove it for you.

One way to determine whether the cover is held in place with screws or with another type of fastener is to try gently prying it loose with a putty knife or thin screwdriver. If screws are holding the cover in place, this will work; if there are other fasteners, prying the cover loose will likely cause damage. In either case, it is best to call a professional if you cannot remove the cover yourself.

Some covers can be removed by gently unscrewing them by hand, but this is not always possible. If the cover is too tight or if there appears to be something holding it in place that you cannot see, it is best to call a professional. Trying to force a cover that is not meant to come off can damage the light fixture or the ceiling and pose a safety hazard.

If you can remove the cover, be sure to store it in a safe place so that it does not get damaged or lost. It is a good idea to keep track of the screws or other fasteners used to secure the cover, as they will be needed when it is time to put the cover back on. If you do not have any spare screws or other fasteners, you may be able to purchase them at a home improvement store.

Benefits of Light Dome Fixture

Below are the benefits of the light dome fixtures

  • They have a low power consumption capability while still providing you with superior lighting.
  • They can fit anywhere, whether outdoor or indoor.
  • They are simple to install
  • With the dome lighting, you can direct the light to a specific area depending on your specification.


  • Always turn off the power to the light fixture at the breaker box before beginning any work.
  • Wear gloves to avoid getting cuts on your hands.
  • Do not stand on a ladder while removing the light cover.
  • If you are uncomfortable working with electricity, please call a professional electrician.

How To Take Off A Ceiling Light Cover With Clip

Another type of ceiling light you will find is the one designed with a round metal clip. The clip’s job is to hold the cover in place. So by removing it, you can conveniently take down the cover. 

The steps involved in taking off the cover are similar to other types of ceiling light. Let’s discuss it in detail. 

Step#1: Obtain a ladder or stool:

Please ensure the ladder or stool you’re using is firm. It’s necessary for your safety. The main reason for using a ladder or stool is so you can reach the ceiling light. 

Now, position the self-standing ladder where you feel comfortable working on the ceiling light. It could be directly underneath the light or some distance away from it. 

Step#2: Get your gloves on:

Now that you have gotten to the top of the ladder or stool, it’s time to wear your gloves. You can use mechanic or gardening gloves. Just ensure your hands are well-protected. 

The gloves keep your hands clean and ensure clips holding the cover won’t leave you injured. 

Step#3: Support the cover with one hand:

Let one of your hands focus on removing the clip, with the other supporting the light cover. Without support, the glass cover would fall to the ground. 

Step#4: Locate the loose clip:

You’ll discover that one of the clips is loose. This clip is usually a breeze to remove, so find and pull it away from the light cover. 

Step#5: Remove the ceiling light cover:

After you succeed in moving the clips away, gently pull the cover away. Follow the same process to fix the cover to its original position.  

A Warm Welcome

Thank you for visiting our site!

We’re doing our best to create a library of useful articles about everything related to homes and appliances.

Our goal is to save you time, stress, and money through our informational guides.

Find out more about us here.


How do you remove a plastic ceiling light cover? Removing a plastic ceiling light cover is fairly simple. All you need to do is push down on the spring clip, pull it away from the fixture, and then set it aside. Make sure that you turn off all power before doing this so that nobody gets shocked! Why do no-screw bathroom ceiling light covers exist? There are a few reasons why non-screws bathroom ceiling light covers exist. One is that they make it easier to replace the light bulb without removing the entire cover. You can also use them in cases where the wiring needs to be accessed. Finally, they can be used as an added safety measure so that no one gets shocked when changing out a burnt-out light bulb. What makes a good bathroom ceiling light cover? A good bathroom ceiling light cover does not require many tools to install or remove. It should also be easy on the eyes so that it does not ruin the look of your bathroom lighting fixture.

About Us

Hi there – we’re Heather and Matt, the folks behind Little Upgrades. Life gets so busy, that there’s not much time left for home improvement projects. So, we decided to focus on the “little upgrades” we can make, that will have the biggest impact on the place we call home. We started this blog to record the lessons and tricks we learn along the way. Welcome to the site!

No locking mechanism or thread

Examples of search text that brings people to this post. Clearly there is a HUGE issue re: ceiling lights. Is the industry listening? At a minimum, this is getting really amusing…

  • how can you loosen a ceiling light that wont turn changing difficult light bulbs covers light fixture dome with no screw cant open how to remove stupid ceiling light how do you open stuck light bulb cover bathroom light mount how to twist stuck light fixture dome

This entry was posted in Uncategorized.


Leave a Comment