How to Install Curtain Rods (DIYer's Guide)


  • Haven’t got a stage? Most smartphones have stage apps which can be both inbuilt, or free.

    Thanks! Useful 44 Not Useful 24

  • Do not rush to rehang your curtain rod in case your curtain appears to be too quick. Let the curtain hold for a day or two to see if the fabric will calm down a bit. It’s possible you’ll wish to iron your curtains earlier than hanging them if the fabric will not be destroyed by ironing.

    Thanks! Useful 37 Not Useful 21



Select Your Supplies

Curtains are a flexible, enjoyable design ingredient. There are a number of totally different kinds of {hardware} and plenty of shade and materials choices to select from. You’ll most likely wish to select your curtains first after which coordinate your {hardware} with the colour and magnificence. Select a cloth that enhances the room, and resolve on a basic design.

Subsequent, resolve how lengthy you need your curtains to be. Would you like them to brush the ground or settle in swimming pools of material under the window? In case your curtains are too quick, it may make the room look smaller and the ceiling appear decrease. Watch out in the event you resolve to let additional materials collect on the ground; the layers of material can develop into a mud collector and a tripping hazard.

The size will be barely adjusted when measuring your home windows to put in the rods. Widespread lengths of curtain panels embody 63, 84, 95 and 108 inches. Select one as near your measurements as you may. It’s finest to get them a couple of inches longer fairly than shorter.

Additionally, you will wish to think about the width of the curtain panels. You wish to make certain the whole window can be lined by the curtains. rule of thumb is to buy panels which can be twice the width of the window.

5. Set up Your Curtain Brackets To The Wall

The remainder is fairly simple – hammer in your anchors and safe your curtain rod hooks to the wall utilizing the supplied screws. We do all of this in real-time within the video above if you wish to see precisely how fast this complete issues goes.

How you can Dangle Curtains

Dangle the curtains utilizing this straightforward two-step course of after you have panels within the appropriate width and size.

What You Want

  • Curtain rod with brackets
  • Screws
  • Tape measure
  • Degree
  • Screwdriver
  • Pencil
  • Wall anchors (elective)

cottage fashion modern front room with blue curtains Credit score: Brie Williams

Step 1: Decide Your Measurements

We held up one curtain panel on the rod to finalize what spot regarded finest after which held the curtain rod bracket in place to take measurements. Utilizing a tape measure, we decided that we wished to put our curtain rods 10.5″ from the surface of the window body (weirdly particular, I do know) and three″ down from the ceiling. These are our measurements to the highest screw gap within the rod bracket since we discover it best to work with the measurements of the place you’ll truly have to drill.

How Peak Impacts Curtain Rod Placement

Use these tricks to be sure to place your rods on the proper peak:

  • For traditional drapes that hold on both aspect of a window, the everyday peak is midway between the highest of the window casing and the ceiling. This is applicable if there are greater than 12 inches between the window trim and ceiling. 
  • For cathedral ceilings, depart roughly 4 to 6 inches above the window trim as a tenet. 
  • It doesn’t matter what the ceiling peak, the minimal distance from the highest of the window casing to the curtain rod is 2 inches.
  • To create the phantasm of peak, mount the material rods near the ceiling. That is notably essential to do if the room has low ceilings.
  • Use these identical guidelines when the home windows are arched.

The Spruce / Almar Inventive

Dangle the Curtains

Relying on what kind of curtain you’ve gotten, hanging strategies could differ. For instance, if the curtain has giant eyeholes, you would simply thread it straight onto the rod. If not, you should utilize curtain clips or rings. It is perhaps simpler to connect the curtains to the rod earlier than securing the rod on the brackets. This can be a should in the event you hold the curtains straight on the rod. If you’re utilizing clips or rings, remember to house them evenly.

As soon as the curtains or rings are on the rod, place it within the curved a part of the brackets and use the small screws there to safe the rod and maintain it from shifting proper to left while you open and shut the curtains.

Earlier than You Set up Your Material Rods

It’s best to pick out your material earlier than you select your material rods, because the fashion of the material will affect which rod and design fashion will perform optimally. It’s additionally essential to know the size of the curtains, as it will affect the place the rod can be put in on the wall. Should you need assistance selecting a method or wish to study extra about material choices, try our guide to different types of drapery.

Step 4

When you’ve factored in curtain size, window peak, and width, proceed to put in the curtain rod bracket.

  1. Maintain a bracket as much as the wall in order that the place of the rod strains up together with your preliminary markings.
  2. Use a pencil to point the place the screws ought to go.
  3. Predrill the pilot holes at these marks.
  4. Insert the plastic wall anchors, align the bracket with the anchors, insert the screws, and tighten till the bracket is flush with the wall.
  5. Repeat the method for the opposite bracket.

In case your pole is longer than 4 toes, think about including a middle help to forestall sagging.

Steps for Hanging a Curtain Rod

Observe these steps to learn to correctly hold a curtain rod. Scroll down for the record of instruments and supplies wanted for this venture.

Step 1: Measure the window

  • So as to add drapes that partially cowl the window, I’d add 2-5 inches to every aspect of the body.
  • To place the curtains fully to the edges of the window, which is at all times my choice to let in probably the most gentle, I’ll add 8-15 inches to every aspect of the window.
  • To fine-tune this measurement, I exploit a stud finder to find the stud beside the window. If a stud if near my desired location, I’ll shift my placement in order that my mounting screws can insert right into a stud.
  • In case your placement can’t land on a stud, simply remember to set up wall anchors earlier than putting in the hanging brackets. You probably have an extended span of over 4 toes or are utilizing a thinner rod, you may additionally want so as to add a middle bracket to forestall the rod from sagging.
  • Subsequent, I’ll measure the peak, from the ground to the highest fringe of my window’s body. A curtain rod often units about 4 inches above the window, however many individuals increase the rod even larger to make the room really feel taller.

Understand that floor-length curtain panels are available considerably customary heights of 84 inches, 95 inches, 108 inches, and 120 inches. Should you resolve to maneuver the rod up, it’s possible you’ll have to buy an extended panel and hem it to size or spend extra money on {custom} curtains.

Step 2: Resolve what sort of curtain you’ll be putting in earlier than hanging the rod

  • The commonest hanging sorts are grommets, that are metal-lined holes within the curtains, tabs which hold above the highest fringe of the curtain, rings which clip onto the curtain and hold on the rod, and a pocket sleeve which slides over and fully conceals the rod.
  • The hanging kind can alter the general peak of the curtain, so remember to have your curtains readily available to assist decide the ultimate peak of the rod.

Step 3: Measure and mark the placement of the hangers on the wall

  • On an open house, it may be troublesome to copy these measurements on either side of the window and have them end up completely stage, so at the moment I’m creating a fast cardboard template.
  • To do that, minimize the nook out of a sq. piece of cardboard that may match excessive nook of the window body.
  • Measure and mark the specified location of the {hardware}
  • Create two holes utilizing the hanger as a information. Now place the template on the wall, slide it in opposition to the window body, and mark the place of the holes.
  • Drive the screws into the wall, and place the hanger.
  • Flip to the other aspect to make the remaining marks and set up the screws.
  • Feed the curtain onto the rod, after which place it on the hook. Add a finial, after which tighten the set screw

Issues You may Want

  • Curtain rod
  • Brackets
  • Screws
  • Wall anchors (if wanted)
  • Screwdriver
  • Drill
  • Measuring tape
  • Carpenter’s stage
  • Pencil
  • Small nails or brads
  • Hammer
  • Stepladder

Material Sizes

Think about the fitting measurement, size, and width drapes in your house. There are numerous store-bought choices or your room could require custom-made drapes to satisfy particular heights, room, or window specs.

  • Within the majority of circumstances, the ideal length for drapes is lengthy sufficient to only kiss the ground. Clearly the place you hold your curtain rod will have an effect. Should you’re buying ready-made drapes, it is going to be a little bit of a balancing act to find out what size to get and the place to hold the rod.
  • For a standard, formal look, think about drapes that puddle a few inches on the ground. This look is not as fashionable because it as soon as was however it’s inherently luxurious and may nonetheless work in formal areas.
  • Don’t permit your drapes to hold above the ground. Once they cease a few inches above the ground, it may make the ceilings look decrease.
  • For drapes to look full, the panels ought to have a mixed width of not less than double the width of the window. You probably have two panels, every one ought to equal the width of the window.
  • Understand that some materials hold in another way than others, so gentle materials could require extra fullness, whereas heavy materials could require rather less.

The Spruce / Almar Inventive

Major Sidebar

Hi there and welcome! I am Debbie Chapman, founding father of One Little Venture and writer of the e-book Low-Mess Crafts for Youngsters. I really like creating enjoyable and simple crafts and cooking up scrumptious recipes for my husband and three youngsters. Extra About Me

Like to cook dinner, bake, craft, create?

Get the Ebook Low-Mess Crafts for Youngsters 72 Initiatives to Create Your Personal Magical Worlds Get your copy

Join the Publication

Get the newest This Previous Home information, trusted suggestions, methods, and DIY Smarts tasks from our specialists–straight to your inbox.


Leave a Comment