How to Install a Barn Door Like a Pro

Group QA

Add New Question Ask a Query 200 characters left Embody your e mail handle to get a message when this query is answered. Submit



Tips on how to set up a barn door

Eradicating door trim generally is a daunting and costly activity so this tutorial on how one can set up a barn door will blow your thoughts!

Eradicating door trim might be costly as you have to to restore the sheet rock and probably replaster the world. Door trim when eliminated, sometimes leaves the wall beneath the trim in want of TLC. The sheetrock will want important sanding, patching and repainting.

That’s the reason this sliding barn door set up is ideal as you do not want to take away the trim.

As a lot of chances are you’ll know, we’re planning a transfer within the close to future (Replace: You possibly can see our new mediterranean house right here) so I reached out to a good friend to see if she was recreation for a kitchen door makeover.

My good friend has a ravishing kitchen however sadly, their basement door (which ends up in their completed basement) swings proper into their kitchen island space creating a serious visitors jam when the door is in use.

As you’ll be able to see under, the door swing is totally annoying and never purposeful in any respect.

My good friend Sophia and Gerry had been thrilled once I advised them about this chance with JELD-WEN and couldn’t wait to deal with the undertaking. At first once I advised Sophia about us sharing how one can set up a barn door right here on the weblog, she giggled and stated “what?” ha. 

The JELD-WEN Design Glide Barn Door package has straightforward to learn directions and took only a Saturday morning to put in.

Tips on how to Set up a Barn Door With out Eradicating Door Trim – Simply A Fast Spackle

We eliminated the usual sized present basement door in addition to the door hinges. The great factor concerning the JELD-WEN barn door package is you’ll be able to set up the door proper over your present door trim. You do NOT must take away the trim!

You will want to make use of some spackle (we used the short dry model) to fill the world the place you take away the earlier doorways hinges however that’s all. It took about quarter-hour to fill the holes, sand and add contact up paint to the prevailing door hinge spots.

Make sure to reference JELD-WEN’s web site for acceptable sizing.

Step 1: Set up the backer board

You’ll want about an inch of clearance between the door and the wall. If the observe for the door doesn’t offer you that a lot clearance by itself, you’ll want a backer board for the observe.

A backer board is a sturdy block of wooden on which the observe and door will hold. It’s an necessary piece to assist the door in the event you’re putting in your door on drywall. It presents further assist for hanging the door with out having so as to add blocking inside the wall. A chunk of 1×4 ought to be adequate, and it ought to be the identical size as your observe. You possibly can paint it the identical coloration as your wall, and we are able to match that coloration for you!

Discover the wall studs with the stud finder. (Now’s while you’ll need to use the time to make a stud finder joke, too.) The primary stud ought to be on the hinge facet of your door. Mark the studs on the wall then maintain your backer board stage towards the wall and switch the marks to the backer board.

You can now pre-drill the holes for the hanging ha

Now you can pre-drill the holes for the hanging {hardware} within the backer board.

Clamp the observe to your backer board, and use the pencil to mark the positions the place you’ll fasten the observe to the backer board, then take away the observe from the backer board. Drill starter holes within the backer board to make hanging the observe simpler.

A starter gap (or a pilot gap) is a small gap drilled in materials to information the screws alongside a path and make it simpler for screw threats to chop via the fabric with out breaking the screw.

Now that you’ve got holes for the hanging {hardware} and pilot holes for the observe {hardware} in your backer board, you’ll be able to hold it. A good friend might be useful when hanging the backer board. Use wooden screws to undergo the backer board and into the wall studs. Since you used a countersink bit for the holes, the screw heads ought to now be under the floor of the board and you may fill the entire with the wooden filler and paint over the crammed holes so you’ll be able to’t see them.

Issues You will Want

  • Barn doorways
  • Washers and bolts (include barn doorways)
  • Mounting boards
  • Dry wall fasteners
  • Joint brackets
  • Drill
  • Spacers
  • Bolts
  • Goggles
  • Hanger curler

Execs and cons

There are admittedly numerous execs to putting in a sliding barn door in your house. They’re nice in tighter areas, comparable to hallways, and so they’re a comparatively easy DIY undertaking, so that you received’t have to rent out a contractor (until you’d prefer to not do this project your self!). Nevertheless, they do require sufficient further wall area for them to roll alongside, and may probably obscure any paintings you’ve got on that wall. Beneath, we’ve gone into the questions you need to think about earlier than embarking on the undertaking.

Will you’ve got sufficient privateness?

Earlier than you think about putting in DIY barn doorways, Cynthia Peller Hum, Associate at Hirsch Bedner Associates, the worldwide chief in hospitality inside design, reveals a serious element you want to remember: Sound and privateness. Not like a conventional door, sliding barn doorways don’t block out nearly all of sound and noise.

“Don’t neglect you’ll hear extra sound via a sliding barn door than a conventional swing door, because the edge isn’t sealed as tight,” Hum identified.

So far as privateness goes, you additionally received’t have the ability to lock a sliding barn door in place as simply — which may show to be annoying if you’re attempting to maintain your loved ones or roommates out. In case you are putting in the barn door within the entryway to a toilet or bed room, think about hook and eye closures or a latch with a strike plate.


  1. First, ensure you’ve got sufficient room for barn doorways! You will want at the least as a lot area on the surface of the door as on the within, to permit room for the door to slip out of the best way. For double barn doorways, you will set up two full units of {hardware}, centered in the course of the door opening.
  2. As soon as you have purchased the right dimension door and {hardware}, open the bundle and ensure you have all the precise items. Collect your instruments so you are not climbing off your ladder to discover a screwdriver within the storage.
  3. Familiarize your self with the directions. Remember that one of many doorways will likely be hung as a mirror picture of the opposite, so maintain this in thoughts whereas studying directions.
  4. Take your time making measurements and markings!
  5. Your laser stage is your greatest good friend! The important thing to barn doorways that function nicely is getting them precisely stage. Dangle your laser stage on the other finish of the wall from the place you will be working, so your palms do not get in the best way of the beam.
  6. Get a buddy that will help you with the precise set up. There are some elements that appear to require greater than two palms.
  7. You possibly can modify a door cease (included) to cowl the hole between rails, in the event you desire a seamless look. Or you will get a observe joiner in order for you the doorways to have the ability to slide to both facet.
  8. Set up the delicate shut mechanisms earlier than hanging the door slabs. (This step will not be included in your {hardware} directions in the event you purchased them individually.)
  9. Use the included ground guides to maintain your doorways from banging towards the wall or door frames!

Tips on how to Set up a Barn Door Over Present Trim

Putting in barn door {hardware} isn’t tough, however it may be just a little completely different from putting in different varieties of {hardware}. The trick is to know the logistics concerned earlier than you get began with the undertaking.

All {hardware} is just a little completely different so you have to to check with the directions supplied for measurements. In case you are putting in a barn door over existing trim, we advocate putting in a header first.

Tips on how to Set up a Barn Door Header

You possibly can mount the rail on to the wall, however we advocate utilizing a 1×2 header for 2 causes. First, it offers further clearance so the bolts or {hardware} on the door don’t hit your trim.

Second, it offers you extra factors to mount to the studs within the wall. Then you definitely don’t have to fret as a lot concerning the lug bolts on the rail hitting studs, they’ll simply go straight into the 1X2.

Begin by measuring the size of your rail, that is how lengthy it’s essential to minimize the header. When you’re planning on portray or staining your header, you’ll need to try this earlier than attaching the header to the wall.

Line the header up with the top of your trim on the facet the door will likely be closed on. Find the studs within the wall above your door and utilizing screws connect the header straight above your present trim. Now you’re able to mount the rail! Once more, check with your particular {hardware} on how one can mount the railing.

PRO TIP: When mounting each the 1X2 and the rail you’ll want to use a stage. The door will roll open or closed by itself if it isn’t stage.

After mounting the rail securely to the wall, it would be best to add the bumpers on every finish by sliding them on and tightening the hex bolts. Now you’ll be able to transfer to your door.

Getting ready to Set up a Barn Door

Test the {hardware} instructions on the place and how one can drill the bolt holes that connect the wheel {hardware} to the door. Use a carpenter’s sq. to make sure accuracy. The wheels will hold in direction of the again of the door.

Drill the holes with the suitable dimension drill bit and tighten the bolts. If it’s supplied, connect the “anti-jump” bumper to the highest of the door so it received’t unintentionally leap off the rail. Now you’re prepared to hold your door!

Dangle Your Barn Door

Carry your door inside and gently hold it on the rail and place the “anti-jump” bumper so it received’t come off. Ensure that the door is hanging straight after which mount the door information onto the ground, to assist information the door on the underside.

Congratulations, you’ve simply put in a barn door! Step again and admire your work!

Codes and Permits

Inside door set up usually doesn’t set off the necessity for a building permit. However to be on the secure facet, test along with your native allowing division. One of many values of a pair of barn doorways is the additional width. So if it’s essential to widen an existing doorway or create a brand new doorway, chances are you’ll want to use for a constructing allow since this may occasionally compromise the wall’s structural integrity.


Nathan put in the Z-Bar Knotty Alder Wood Interior Sliding Barn Door Slab with Hardware Kit that may be discovered at The Home Depot. The package comes with all of the supplies required to assemble and hold the door, although Nathan select so as to add further 3/4 inch inventory on this software as a result of the wall was not plumb and the door would have hit the baseboard in any other case.

For a end, Nathan and Stephanie stained the door utilizing a water primarily based stain by Minwax. Each the stain and the rags and brushes wanted to use it may be discovered at dwelling facilities.

Suggestions For Putting in a Barn Door Indoors

  • Because of the width of the barn door and observe, it’s endorsed that you simply use a laser stage fairly than a bubble stage. It will produce a extra correct stage line.
  • If it is a double door set up, you’ll want to use a observe connector (typically included) to affix the tracks for steady and clean motion.
  • A door header is required for the kind of barn door set up on this undertaking because the steel observe wants a strong wall floor for attachment.


Leave a Comment