How to Fix a Wobbly Ceiling Fan

Checkthe Blades

Is your ceiling fan making noise? 

In that case, verify the fan blade connections.

There are screws that join the blades to the blade irons. If these come unfastened, they’ll create an aggravating, intermittent ticking sound. Within the fan trade, this is called a “blade tick”.

The identical applies to the screws that join the blades to the fan motor. If these grow to be unfastened, a ticking noise also can happen.

When you’re inspecting your fan connections, examine the blades for correct positioning. Do any look warped, broken, or off-kilter? In that case, this could additionally trigger your blades to grow to be shaky and loud.

If one is hanging decrease than the remaining, you possibly can attempt tightening it. If the injury is beauty or unrepairable, you possibly can contact the producer or verify on-line to seek out a precise substitute. 


8. Verify the Pull Chain

Some ceiling followers include a distant management right now, however many fashions nonetheless have a pull chain. They’re often put in away from any shifting elements, however it could possibly find yourself inflicting a loud ceiling fan.

Observe the pull chain with the fan turned on to excessive. It shouldn’t strike any elements of the sunshine fixture or blades. If it has a swinging movement, the blades aren’t accurately balanced.

Shorten the chain if the blades are customary. It solely must be lengthy sufficient for straightforward entry as you stroll previous it.

Ceiling Fan Blades Don’t Flip Correctly

Most frequently, if the fan may be turned on however the blades don’t spin, solely run at one velocity, or change speeds unexpectedly, the fan’t capacitor is flawed or going dangerous. See “How one can Change a Ceiling Fan Capacitor,” under.

If the fan’s mild works and/or you possibly can hear a noise within the fan once you click on the distant or swap, it’s getting energy and that the swap works. Flip the “Ahead—Reverse” swap (proven within the video under) a number of occasions, after which lock into “Ahead” place and check out once more.

If that doesn’t remedy the issue, ensure the dip switches on the receiver within the fan and the distant management are each set to the identical frequency (you could have to look your fan’s handbook on-line to do that).

If the blades don’t transfer once you push them by hand and it’s a brand new fan, packing materials could also be jamming it. If it’s an older fan that labored earlier than, a screw or half could have come unfastened and jammed it.

How one can Change a Ceiling Fan Capacitor

Most followers have a “begin capacitor” that offers them the enhance they should begin turning. If this capacitor burns out, it have to be changed or the blades received’t flip or will flip improperly.

Altering the ceiling fan begin capacitor is less complicated than it sounds, as proven within the following video. If you go to a house enchancment heart to purchase the substitute, take the previous capacitor (or a photograph of it). It’s essential you can get an identical substitute.  Remember to flip off {the electrical} circuit earlier than disassembling the fan!

Ceiling Fan Buying Guide

Place of the Electrical Field within the Ceiling

Earlier than putting in a ceiling fan, you may wish to be sure that the underside of {the electrical} field is totally flush with the ceiling on all sides. This manner the fan’s hanging bracket tightens securely to {the electrical} field, not the ceiling materials, thus offering the right assist wanted.

Many occasions an electrician could have supported the field the right approach, however could fail to get it completely flush with the ceiling. If one facet of the field is flush, but the opposite facet is recessed behind the ceiling 1/8″ of an inch or so, it will trigger the bracket to tighten in opposition to a ceiling floor that’s often sheetrock, and to not the stable basis of {the electrical} outlet field. If the screws, that holds the hanging bracket to {the electrical} field are tightened all the way in which, they are going to pull the bracket by the sheetrock inflicting injury to the ceiling. For that reason, the installer could solely comfortable that screw and not likely torque it down tightly prefer it actually must be. The bracket could appear safe on the time, however as soon as the torque from a ceiling fan motor on excessive velocity kicks in, it’s not sufficient to safe the fan and maintain it from wobbling. The fan could by no means fall from the ceiling, however it might by no means run easily both. The sheetrock could finally crumble away, inflicting then the hanging bracket to grow to be a lot looser and the wobble will grow to be a lot worse.

That stated, you possibly can attempt to steadiness the fan (outlined in Cause 6) however it might solely present a short lived repair and several other months, or a 12 months or two later you might be proper again to the identical problem of your ceiling fan not working easily once more.

One other fast repair, which may be extra everlasting, however nonetheless not as splendid as ensuring {the electrical} field is put in correctly at first, is to take the fan and it is hanging bracket down from the ceiling. Set up washers between {the electrical} field and the hanging bracket, filling up the of the hole between the underside of the ceiling and {the electrical} field, in order that the ceiling fan hanging bracket can tighten up solidly with out pulling by the sheetrock. Attempt reinstalling the ceiling fan and see if that helped.

NOTE: Earlier than eradicating the fan from the ceiling to repair any problem, ensure you detach the blades from the motor. Taking a fan down fully assembled threat bending a blade holder. If a blade holder turns into bent your wobble problem won’t go away till you repair that as nicely.

Backside line for Cause 5, when putting in a brand new ceiling fan, be sure that your electrical field is put in flush to the ceiling and tightly secured earlier than hanging the fan. Don’t be in a rush, as this is without doubt one of the most essential steps to forestall ceiling fan wobble.

Cause 6:

4. Study Any Warped Blades

All the blades on the fan ought to have about the identical form and orientation. This troubleshooting tip requires a eager eye for warps on the ceiling stage.

Use a ladder to entry the fan’s blades. Have a look at the blades’ profiles as a resident manually turns them. No blades ought to look greater or decrease than the subsequent ones.

Bend any blades into the form that aren’t matching the others. In some instances, residents might have to exchange one or two blades to realize a balanced look.

Know when to name an expert

Typically, in case you see uncovered wires, have by no means labored with electrical wiring, or simply aren't snug coping with potential electrical points, Lynch says you're higher off leaving this job to an expert. "Not solely can working with uncovered wires shock you or trigger different bodily hurt, however it could possibly additionally hurt your electrical system in case you brief circuit it," he explains.

Mission particulars


1 out of 5 Straightforward Considerably straightforward. It takes a bit of labor to put in a fan-approved electrical field, however the ceiling-fan meeting and set up are very simple.


$50 to over $350, relying on dimension and options of the ceiling fan

Tighten the Mild Fixture

Does your ceiling fan have a light fixture hooked up? These fashions are particularly well-liked and ultra-efficient, delivering air circulation and room illumination. 

But, these have additional elements and equipment that almost all followers don’t embrace. These also can grow to be unfastened over time, particularly in case you use your fan steadily.

When you discover a noise and all the pieces else seems to be intact, attempt inspecting the completely different elements of the sunshine fixture. This contains any globes or shades surrounding the bulbs, in addition to the bulbs themselves.

Be certain that all the pieces is correctly screwed in and in place. The {hardware} round most bulbs is often secured by way of thumbscrews, making it straightforward to tighten by hand with out instruments.

In truth, it is best to keep away from utilizing instruments round these delicate elements altogether, as they’ll simply break in case you slip or by accident overtighten them.

Nonetheless listening to that click on, even after you tighten all the pieces?

Most producers promote silencer bands to assist maintain the sunshine fixtures in place. These go across the neck of the sunshine’s globe or shade, including additional bulk to assist them match as snugly as attainable. For a DIY approach, you can even set up a thick rubber band in the identical spot.

2. Damaged flywheel

REASON: Although uncommon, one of many causes of a ceiling fan that received’t spin is a damaged flywheel. In a few of the fashions of ceiling followers, the blades are hooked up with a rubber flywheel somewhat than the motor itself.  As a result of fixed utilization and over a time period, the flywheel could grow to be weak and brittle. This may increasingly trigger it to interrupt. In such a state of affairs, the motor would nonetheless be working or working however the blades might not be spinning.

SOLUTION:The answer on this case is substitute of the flywheel. This must be carried out by an expert.

Image Credits:
Picture Credit:

Make Positive Blade Irons Are Not Bent

Historically ceiling followers used blade irons (or blade arms) to connect the blades to the motor. Many new modern designed followers have blades that join on to the motor and don’t use blade irons. But, different trendy followers will nonetheless use blade irons. Whether or not or not a fan makes use of blade irons has nothing to do with high quality, however is simply decided by the design the designer of the fan is attempting to realize.

That stated, in case your ceiling fan does use blade irons, the set up directions will virtually at all times state to put in the motor to the ceiling first. Then connect the blades to the irons at ground stage, and eventually connect the irons to the fan motor after it has already been hooked up to the ceiling and wired. It’s because every blade iron is pitched to a precise diploma from the producer, and if assembling your entire fan on the ground stage after which attempting to connect it to the ceiling there’s a good probability a blade iron might grow to be barely bent, thus inflicting the fan to wobble.

To verify to see if that is the offender of your shaking fan problem, you’ll need to do what is called blade monitoring. To trace the blades, merely decide one spot of the ceiling to measure right down to a blade. Depart the tape measure at similar spot after which slowly and thoroughly spin every blade in direction of the tape measure. Measure the excessive facet and the low facet of every blade’s pitch, or tilt. When you discover a couple of blades measure completely different from the others, it’s most probably as a result of these blade irons have been bent throughout set up. You possibly can try to use stress to bend them again according to the others, however it is rather arduous to get them actual. Additionally, if bent severely they may break. Your greatest guess to repair a wobbling ceiling fan that’s attributable to bent blade arms is to order a matched substitute set of irons.

Additionally, together with Cause 3 is a warped bladed. With a high-end ceiling fan this often won’t be a difficulty. Nonetheless, with cheaper followers, that use pressboard blades, a wrapped blade could possibly be the basis of the issue.

Cause 4:

Join the E-newsletter

Get the most recent This Outdated Home information, trusted suggestions, tips, and DIY Smarts initiatives from our consultants–straight to your inbox.


Leave a Comment