How to Cut Holes in Porcelain Tile

Step 1: Know Your Tiles

One of many first issues it’s good to take note of if you wish to learn to drill by way of tile is the type of tile you might be working with. If you already know the traits of the fabric you are attempting to bore by way of, then you’ll have a greater understanding of the dimensions of the duty at hand.Porcelain tiles, for example, are more durable to interrupt by way of than ceramic tiles since they’re very dense. Consequently, drilling by way of porcelain tiles would require extra work and preparation than slicing by way of different forms of tile. Additionally, you will want a specialised drill bit that may penetrate the onerous floor of porcelain tiles. The identical goes for drilling into stone tiles.Now, that you already know what you’re up in opposition to, let’s have a look at the instruments you’ll want for drilling by way of tiles.


Instruments Required to make a gap in ceramic or porcelain tile

  • Rotary drill bit (might have to seek out one that’s for slicing porcelain or ceramic)
  • A gap noticed can be used, however it should make a much bigger gap than the rotary hand drill.
  • Drill motor with variable velocity settings and chuck key
  • Bits: hexagon bits, Phillips head screwdriver bits, flathead driver bits, Torx cup level driver bits

A rotary hand drill will work on ceramic however not for slicing porcelain, which wants no less than 3000 RPMs to be able to get sufficient energy behind it. The heftier gap noticed may deal with each sorts with out concern, however hold your fingers clear whereas it’s spinning as a result of it may throw a chip of tile at you.

How To Lower A Gap In Tile

View in galleryView in gallery

Now it’s time to get right down to the nitty-gritty. Let’s discuss how one can really reduce the tile. In terms of straight cuts, it’s fairly easy. However in relation to holes, issues get fairly difficult. A gap cutter is your best choice.

A gap cutter can reduce completely spherical holes in tile in seconds. You select your dimension and reduce the outlet identical to it’s a gap punch. Solely it usually makes use of a drill to chop these holes, which you most likely have already got available. 

How To Lower A Gap In Tile With A Gap Noticed Package

View in galleryView in gallery

The very first thing it is best to do is measure the thing it’s good to tile round. That is most frequently a showerhead or nozzle. However it may be plumbing or one thing else totally. It’s good to measure it and make a replica of that form on cardboard.

Then, you can begin testing out the outlet noticed heads that you’ve. Discover the one that’s the closest in dimension, giving a tile bit additional room. After you select a bit, it’s time to start out slicing the tiles to suit.

When you solely have one tile to chop, like if the outlet is close to the middle of a tile, then you’ll drill straight by way of. However a greater strategy to forestall breaks is to have two tiles cowl the outlet. In the event that they meet within the center, it’s simpler to chop with out breaking it.

You have to to put one thing underneath the tile to regular it and shield the ground, drill bit, and the tile itself. This acts as a cushion for all three. Drywall does an incredible job of this. Then, placing a knee or hand on the tile, begin drilling. 

Push fairly onerous to maintain the drill and tile regular and it ought to drill by way of in lower than a second. That’s all there’s to it. The toughest half except for that’s ensuring the measurements are all right and in place. 

What to Keep away from When Drilling By Porcelain Tile

An skilled handyman will inform you that there are a couple of frequent errors folks make when making an attempt to drill by way of tremendous onerous tile.

Studying from the consultants means fewer errors and expensive repairs. Listed below are a couple of of their tips about what to keep away from when drilling by way of onerous porcelain:

  • Don’t drill quick – keep in mind, sluggish and regular wins this race.
  • Don’t use a hammer drill – a hammer drill strikes shortly forwards and backwards, very like a hammer and nail. One of these power will most definitely trigger a crack within the tile.
  • Do cease in case your drill bit is smoking or crimson – this can be a warning signal that the friction and warmth from the drilling motion are damaging the drill bit.
  • Don’t attempt to use a daily drill bit – it won’t be sturdy sufficient for the job.
  • Don’t begin the job with out planning correctly – take time to organize, it should repay.
  • Take particular care if working close to the sting of a tile – it’s particularly susceptible to cracking.

Tips on how to Drill a Giant Gap in Tile With no Gap Noticed

However what if it’s good to bore a 2-inch gap for a plumbing stubout? Contractors sometimes use costly gap saws with carbide-grit slicing edges, however there’s one other approach.

  • Draw the outlet define on the tile with a felt-tip pen or grease pencil.
  • Use a ¼-inch masonry bit to drill a collection of closely-spaced holes across the circle. Then take a hammer and really frivolously faucet the tile alongside the ring of holes.
  • Faucet contained in the define and be affected person, because it may take a few minutes earlier than the middle of the outlet breaks free. The opening edge will probably be tough, however you may cover it with an ornamental escutcheon plate.

This drill-and-tap approach can be used to make a sq. or rectangular cutouts in tile.

Step 5: Don’t Overlook to Cool the Drill

One of many secret to drilling a gap by way of tile is conserving every thing cool. Use a small moist sponge to chill down the drill bit and forestall it from overheating.When you’re by yourself and might’t maintain the drill bit in a single hand, the wooden sample within the different, and funky the drill bit on the identical time, then you may cease every now and then and spray some water on it. Be sure that to not pour water into the motorized part of the drill.One other trick you would use to maintain the drill cool is holding a moist sponge underneath it. That approach, you’re not solely stopping the drill from overheating, however you might be additionally catching the mud and particles produced by the tile. To not point out, you’re stopping the water from pouring down the wall and all around the ground.A brief notice right here: not like carbide drill bits, which cease the second they overheat and have to be saved cool always, diamond bits should not as high-maintenance. They may proceed to work even once they warmth, so long as you permit them to chill down. However, if you wish to improve the lifespan of your instruments, then it’s good to drill slowly, don’t put an excessive amount of stress, and lubricate the drill with cool water.

3. Measure, And Mark The place The Gap Will Go

Rigorously measure your venture website and clearly mark the place you wish to drill the outlet. Use masking tape t0 mark an ‘X,’ centering the drill website, and remeasure to verify the situation is precise. Masking tape not solely helps designate your spot, nevertheless it additionally helps to extend floor rigidity when the drilling begins. The taped ‘X’ will scale back slippage and help in making a neater gap.

#2 Slicing Porcelain Tile Utilizing an Angle Grinder

The second finest instrument that can be utilized is an angle grinder which may do a number of cuts in numerous dimensions and shapes together with the L cuts, the circle cuts, straight cuts, sq. cuts and many others. Slicing porcelain tiles round the bathroom for pipes and exposing waste wants a curvy reduce reasonably than drilling holes.

An angle grinder is completely suited to slicing curves in tiles.

  • On the tile, mark out the form which is to be reduce and have a transparent concept about which aspect is the waste. You may get carried away simply and rating on the aspect of the tile. Use an electrician’s tape to make a cross as a marker.
  • Mark the specified form on either side of the tile. Be sure you comply with the form on the sting of the angle grinder gently with little stress to get a clear mark which doesn’t chip.
  • Make a number of small cuts by turning over the tile. These will keep away from the jamming and show you how to preserve management. The blade ought to run into the waste aspect.
  • After you get the specified reduce, you may smoothen the sting through the use of an abrasive wheel. The completed reduce will rely upon whether or not the reduce is clearly seen on the (polished/unpolished) porcelain tile.

Simply take the grinder and pull it throughout the sting that you just wish to reduce and the grinder does the give you the results you want very quickly with effectivity and cleanliness.

Steps for Drilling By Tile

Step 1: Determine what sort of tile you could have

Typically, there are three sorts of tile:

  • Glazed ceramic tile is the most typical, what you’ll discover in nearly each older residence, and the simplest to drill by way of.
  • Glass tile is used extra as an accent and has solely been round for 15 years or so.
  • Porcelain tile appears to be like quite a bit like common ceramic tile, nevertheless it’s a lot more durable.

Step 2: Have the correct bit for ceramic tile

Normal drill bits don’t work on tile, however to not fear. Ceramic tile will be drilled with a carbide bit, whereas glass and porcelain name for a diamond-tipped bit.

Whereas that sounds costly, a ¼ inch diamond tipped tip prices underneath $20, and a carbide little bit of the identical dimension will be had for lower than $10. When unsure, purchase the diamond bit. It’s going to drill any sort of tile.

Step 3: Format the wall for fulfillment

They are saying to measure twice and reduce as soon as, however given the results of drilling a gap in a tile wall within the mistaken place, it’s a good suggestion to measure 3 times and drill as soon as.

Learn Extra About Ceramic Tile: Sustaining Ceramic Tile Tips on how to Lower Tile Tips on how to Set Tile Smoothing Out Tough Tiles

  • First, adhere masking tape to the wall within the space the place you’ll drill. It’s simpler to precisely mark the outlet location on tape than on tile.
  • For equipment resembling towel bars with two mounting brackets, use a stage to verify each units of holes align.
  • Attempt to find the {hardware} near the middle of the tile – the sides crack extra simply.

Step 4: Drill slowly

  • The tape not solely makes it simpler to mark the wall but in addition helps to maintain the drill bit from skidding when beginning the outlet.
  • Go slowly, significantly at first, to verify the outlet finally ends up the place you need it.
  • As soon as the outlet is began, you may improve the drill velocity, however don’t run it at full velocity.
  • Regular stress and a medium velocity will drill the outlet with out overheating and damaging the drill bit.

Step 5: Pace up on the finish

  • You’ll really feel a change in resistance when the bit will get by way of the tile. Now you may velocity the drill up whereas backing off the stress. This can lengthen the outlet into the drywall or backer board with minimal injury.
  • When you’re accomplished drilling, push the anchors in place, screw the {hardware} residence, and vacuum up the small quantity of mud.

Current Posts

  • How To Drill Through Ceramic Tile With Ease
  • How to Tile Around a Window without trim
  • How to Tile a Fireplace
  • How To Fix Loose Or Broken Floor Tiles
  • How to Install Tile Around a Toilet


Leave a Comment