How much does it cost to smooth textured walls?

Related Discussions

Wall texture – hand troweling or knock-down?

Q

Comments (2)

I have knockdown. I like trowl better but knockdown is just as good and, for me, it ha been durable. Easier to chip than trowel and then u have to buy a spray and reprint the area. If you want smooth, just tell the contractor to leave it unfinished and hire someone to do it. U got live with it….See More

Wall texture advice

Q

Comments (4)

IMO, the texture is dated. I would have a professional sheetrock company come in and give an estimate on what it would cost to skim coat the walls to a smooth finish. This can usually be done without removing the existing texture but it does take a couple of coats and must be sanded well. It will not be inexpensive, but less than replacing completely….See More

Dislike knockdown ceiling look–other smaller textured choices–Help!!

Q

Comments (7)

it will make the ceilings feel lower to have a texture. will this be a basement playroom type of situation or actual 'family room with tv where friends would watch the superbowl'? sometimes you need to spend the few dollars more after the fistful….See More

Cost to texture walls and ceiling

The cost to texture walls and ceiling is $450 to $1,000 for a bedroom and $600 to $1,400 for a living room.

Cost to texture walls and ceiling - chart
Cost to texture walls and ceiling – chart

Cost to texture walls and ceiling
Room Dimensions Total cost
Bedroom 11 x 12 x 9 ft $450 – $1,000
Living room 12 x 18 x 9 ft $600 – $1,400
Garage 20 x 20 x 9 ft $950 – $2,100
Basement 30 x 30 x 9 ft $1,700 – $3,700

Find top-rated drywall contractors in your city. View Pros

Video

How much does it cost to Sheetrock a 2500 square foot house?

The cost to drywall a whole house ranges from $5,000 to $30,000. This depends on the size, total square footage of materials needed, and whether or not you include a garage. … Cost to Drywall a Whole House.

House Size Drywall Square Feet Price
2,500 7,900 – 9,400 $7,900 – $28,200
3,000 8,000 – 10,000 $8,000 – $30,000

Should the whole house match?

As a general rule, yes, the whole house should match. If you have a strong artistic vision that requires you to texture one room differently from all the others, well, it’s your house.

Why Use Drywall Finish Textures?

There are three main reasons why drywall finish textures are so popular among homeowners.

First, drywall texturing adds character and uniqueness to your space! There are so many different texture options for drywall, and each one creates a completely unique appearance. If you are looking for a way to add interest to a room, drywall texture is something you should consider.

Next, texture is a perfect way to cover up imperfections, signs of damage, and repair work on a wall or ceiling. It’s a more affordable option than drywall replacement.

Finally, drywall texture can dampen sound. If your goal is to build a room that naturally dampens sound, then you have probably already considered soundproof drywall boards. Why not boost the sound dampening effect with drywall texture? The increase in surface area absorbs more sound than regular smooth drywall. This technique is especially popular in rental units like apartment buildings to help maintain privacy between living spaces.

Drywall texture cost calculator

The following table shows the average cost to texture 500 square feet of drywall.

Average drywall texture cost calculator
National average cost $600
Minimum cost $400
Maximum cost $900
Average cost range $500 to $680

Cost data is from research and project costs reported by HomeGuide members.

Get free estimates from drywall contractors near you. View Pros

How do you quote a drywall job?

Multiply drywall square footage by the going rate

Once you have determined your sheet count and corresponding drywall square footage, you can multiply this by the contractor’s square footage rate. You can use the total drywall square footage numbers to estimate both material and labor.

Can I retexture walls and ceilings myself?

Some types of texturing involve applying drywall compound to existing walls, then working with it to create textures. Others require the use of power tools, such as a hopper gun. Depending on your experience and comfort level with DIY home projects, you might be able to do any of the textures we have described here yourself. The cost of materials for this kind of job can range from $0.50 to $2.00 per square foot. Some people even use plastic grocery bags to apply texture.

You might prefer to hire a professional. If so, your budget should include both labor and DIY costs.

How Can We Help You?

The Drywall Price Guide has been created specifically by industry experts to help customers determine what they need for their Drywall project and more importantly, how much it’s going to cost them. We share our industry knowledge and “know-how” of Drywall installation, repair and all major types.

Within all sections we provide detailed project costs and information for all main types of drywall.

Cost for Prep and Repair Work

The cost of the project will also be partially determined by how much prep and repair work is needed. For example, if the contractor needs to remove an existing texture that could increase the cost of the project by several hundred dollars.

It’s also going to be necessary to repair any water damage or imperfections in the walls or ceilings before applying a new texture. The most common form of ceiling damage is water spots or other forms of water damage.

If the damage is extensive enough, then it might even be necessary to replace all of the drywall in the room, though this is often not the case. If you’re interested, try our drywall calculator to estimate how many panels you might need for the project.

If there is an existing ceiling texture, that will need to be removed as well. Scraping the existing texture off the ceiling should be done first and usually costs $1.25 – $2.00 per square foot.

Are Textured Walls Outdated?

One of the biggest reasons that homeowners immediately tackle textured walls is because they believe they’re outdated.

They’re right to some degree.

Some textures, like popcorn and orange peel, have associations with a particular decade that dates them.

Popcorn was all the rage in the ’50s and ’60s.

Because of that, it makes anyone seeing popcorn textures in a new home feel as though the home is actually old and dated.

The same goes for orange peel textures which were popular in the 1970s.

That said, some textures are still popular and commonly seen in use today.

Knockdown, Venetian plaster, and even lace are some of those textures.

While you’re unlikely to see entire walls made of textures in new homes, you can sometimes find them as accents.

Certain parts of the wall may have a texture now instead of the entire thing.

They’re useful for highlighting certain areas of the home or covering up blemishes.

While some textures are old, others are finding new use in many homes.

Labor Charges

Once you know the square footage of the ceilings, you can come up with an estimate for the labor. According to Home Wyse, the national average for ceiling texturing is between $.46 and $.62 per square foot, as of 2011. This means that you would choose a price and then multiply it by the square footage of the ceiling that you are texturing. In areas that have high labor rates, you may be able to charge closer to the $.62 per square foot.

Wall Texture Types

There are a lot of different types of drywall textures, and as I learned in the comments on this blog post, they are very regional. Keep in mind that they can range from very understated to severe, but the general idea for each doesn’t vary.

Here are the most common:

  1. Orange Peel
  2. Knockdown
  3. Smooth
  4. Swirl
  5. Old World

In my research I found a great alternative to smooth walls in a texture finish called Old World. that made me a believer that we could have the best of both worlds.

A quick google image search shows a huge range of what Old World texture looks like and thankfully none of them look like mine.

The most important thing is that your drywall fini

The most important thing is that your drywall finisher clearly understands what you want. Our finisher knew that I wanted the walls almost smooth, so he did a couple of test spots so that I could see what my finish options were. I chose the one with the least amount of variation and they got to work.

We used this texture on the walls and ceiling, you can see in the below picture where the mud is thinner (because it already dried) and how there is definitely texture, but its not everywhere. (The big color variation is because the mud is still wet, when its dry its almost impossible to see in pictures.)

See how there are little spots that the drywall pe

See how there are little spots that the drywall peeks through? That’s where the Old World style kicks in.

When its dry it looks like this:

How To Smooth Textured Walls

If you want to save on costs and attempt to smooth out textured walls on your own, then there are a few things you should know.

You can smooth out textured walls in a few different ways.

Some are more complex than others and require some understanding of how to install new woodwork and trim.

Other methods are simpler but require more labor.

Here are a few methods you can use to smooth textured walls and save money.

1. Install New Wallboard

Although this method is more complex than other methods, it gets the job done well and results in less labor all around.

You can remove textured walls simply by installing new wallboard.

You’ll want to install 1/4-inch wallboard, in particular.

To do that, however, you’ll need to remove the trim and any other woodwork that currently rests over your existing wallboard.

You can use a hammer or another power tool to remove the nails or screws that keep your trim attached to the wall.

Then locate the woodwork behind the drywall.

You’ll need to attach the new wallboard to that woodwork.

Once you install the new wallboard, you can put the trim back in place and paint as necessary.

Installing new wallboard basically covers the textured wall with a new wall.

While this method is simpler than others, it also requires knowledge of the home and how to remove the trim.

2. Scrape It Off

The cheapest option is to scrape off the textured parts of the wall.

This requires a lot of time and power, but it’s effective and will get the job done.

Here are some of the materials you’ll need for this method to smooth textured walls:

  • Roller and pan
  • Wide paintbrush
  • Scraper
  • Drywall knife
  • Putty knife
  • Drywall sanding pole
  • Sandpaper
  • Sander
  • Respirator
  • Masking tape
  • Drop cloths
  • Rubber gloves
  • Paint stripper
  • Joint compound
  • Ladder

While it may seem like you need a lot of materials, they’re all relatively cheap to buy.

Most of these items can make the job a bit easier if you run into problems or a particularly stubborn area of texture.

The most important tools to have are a respirator, paint stripper, scraper, and joint compound.

You can essentially get the job done with these few items.

You’ll want a respirator and rubber gloves because you’ll be breathing in drywall dust and working with harsh chemicals.

Drop cloths are also helpful to limit how much dust scatters while you work.

To start removing textured walls, you’ll need to spray the surface with the paint stripper.

This will help soften it up.

Then go through with your scraper and drywall knife to scratch off the texture.

You can fix any dings or dents later with the joint compound and your putty knife.

With a lot of hard work, you can successfully scrape off the texture and leave yourself with restored drywall.

Once it dries, you can then paint it to match the rest of the home.

3. Skim Coating

A final method that you can use to remove texture on a wall is to skim coat it.

This is another relatively easy method, but it also requires some work.

The materials you’ll need to skim coat a textured wall are:

  • All-purpose joint compound
  • Thick nap paint roller
  • Spray bottle of water
  • Magic trowel
  • Drop cloth
  • Drywall sander

Like with scraping, you’ll want to cover the work area as much as possible with drop cloths.

It’s even worth moving furniture to another room to prevent dust from collecting on it.

You’ll then need to prepare the all-purpose joint compound with some water in a bucket.

Mix it together until it has the consistency of pancake batter.

If it’s too thin, then it will run down your walls and leave drip marks behind.

Once your compound is ready, you’ll need to use the paint roller to apply it to the wall.

Because joint compound dries quickly, you’ll need to work in small sections at a time.

You can use your spray bottle of water to keep spraying the mixture to keep it usable.

Once you have a section covered with the compound, you’ll need to use the Magic Trowel to smooth it.

Your first coat likely won’t look that much smoother.

That’s because the initial coat is filling in the gaps that the texture created.

You’ll need at least a second or third coat to finally smooth it.

When using the Magic Trowel, you’ll want to move it in the same direction that you used the paint roller to apply the compound.

This ensures you’re not moving the compound out of the gaps it’s filling.

Instead, you’re removing the excess and smoothing it out.

Before you finish, it’s worth shining a light on the wall at an angle.

This can help reveal any areas that you missed or that require a new coat.

Although this method is a bit more challenging to get right, it’s also quite cheap.

Recommended

Tags

Leave a Comment

Adblock
detector